—Configurator
Specify a wall.
Every figure below is computed live from the same engineering model our estimators use. Change anything and watch all of it move. If the configuration is wrong for the room, it will tell you so.
CheckAt 40% drive this wall delivers 600 nits. A moderate indoor environment needs about 800. Raise the drive level, or move to a brighter series.
| Parameter | Value | Basis |
|---|---|---|
| Active area | 4.80 × 1.35 m | 6.48 m² |
| Cabinets | 32 | 8 × 4 of 600 × 337.5 mm |
| Resolution | 2,560 × 720 | carries HD 720p 1:1 |
| Total pixels | 1,843,200 | 5,529,600 emitters |
| Diagonal | 196″ | aspect 3.56:1 |
| Minimum distance | 1.88 m | closer than this, structure is obvious |
| Optimal band | 3.8–5.6 m | the range to design seating to |
| Fully merged | 6.45 m | 1 arcminute acuity limit |
| Service brightness | 600 nits | 40% of 1,500 peak |
| Peak power | 3.4 kW | 15 A at 230 V — size the breaker here |
| Average power | 1.1 kW | 3,469 kWh/year at 10 h × 6 days |
| Heat rejected | 3,794 BTU/h | hand this to the mechanical engineer |
| Mass | 181 kg | before mounting hardware |
| Signal chain | 3 ports | 4.6 Gbps at 60 Hz, 14-bit |
Indicative supply-only rate
R 272,160
42,000 per m² × 6.48 m², excluding VAT. Cabinets, receiving cards and factory calibration only — no processing, rigging, structure, cabling, commissioning or spares. Those depend on the room, and we will not pretend otherwise by padding a percentage onto this figure.